GripX Non-Slip Coating Sealant for Concrete and Stone

• SlipDoctors GripX is a durable, clear, non-slip coating, specially formulated to increase slip resistance on tiles, natural concrete, stamped and stained concrete, sealed surfaces and most other natural stone.
• GripX is an easy to apply roll-on coating, ideal for internal and external areas.
• Once dry, GripX features a semi-gloss finish, with a pleasant-to-the-touch texture, designed to withstand harsh climates.
• It can be used to seal tiles and prevent water damage, scuff marks and scratches.
• This water-based formula is designed to be long-lasting, offer UV protection, and resist chemicals.

• 1 Liter 10-16 square meters

GripX is a non-slip finish and sealant for floors, formulated for use on both indoor and outdoor surfaces to effectively increase traction. The coating is versatile and durable, making GripX an excellent choice for high-traffic areas, perfect for concrete and tile flooring, such as bathrooms and kitchens, or for outdoor spaces like patios and sidewalks.

This non-slip coating can be used to improve traction and prevent accidental falls both with shoes and barefoot on concrete, Lueders stone, brick, travertine, and poolside surfaces. It is ideal for treating stamped concrete patios and decks, as well as a variety of other natural stone surfaces, including limestone, flagstone, quartz, slate, and marble.

• Read the product label, safety precautions and technical data sheet carefully. Follow complete surface preparation and application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear recommended safety equipment and follow safety precautions.

• Surface preparation varies depending on the type of surface. See technical data sheet for detailed information.
• The surface, air and product temperature must be above 4°C and at least 2°C above the dew point.
• All surfaces must be clean, dry and free from dust, dirt, oil, grease, soil, soap scum, waxes, peeling paint and other soluble contaminants.
• Avoid alcohol-based cleaners.
• For better adhesion, lightly sand the surface using 400 sandpaper.
• Rinse thoroughly and allow the surface to dry completely before application.

• Test GripX in a small, inconspicuous area before proceeding with full application.
• Pour GripX into a separate container and mix thoroughly to ensure the additive is evenly distributed. Stir frequently during application to ensure even distribution. Do not dilute.
• Use a fabric roller about 1 cm thick. It is necessary to apply the product in two phases. After the first application, let it dry completely before proceeding with the second. This ensures an optimal result and greater durability over time. Let the first layer dry for 2-4 hours before applying the second layer. The second layer must be applied at a right angle to the first layer.
• Depending on the porosity of the surface, additional layers may be applied for increased durability and traction.
• For light traffic, leave the product to dry for 6-12 hours; for normal traffic, leave for 24 hours.
• CLEANING: While GripX is drying, application equipment can be cleaned with soap and water.

• For general cleaning, use a pH-neutral detergent, scrub lightly with a soft bristle brush, or use a low-pressure rinse. Avoid using alcohol-based cleaners.