Deck Grip: Anti-Slip Sealant for Indoor and Outdoor Surfaces
List price€165,00
- Versatile Non-Slip Coating: Deck Grip is a water-based acrylic sealer designed for concrete floors and various stone surfaces. It provides a durable, non-yellowing finish and is resistant to chemicals and UV rays.
- Pool Safety Solution: Ideal for treating slippery areas around swimming pools and stamped concrete, both sealed and unsealed. Offers exceptional slip resistance even when wet, significantly reducing the risk of unpleasant accidents and improving the safety of those walking on these surfaces.
- Ease of Application: Product includes a 9.5mm roller (roller handle not included) for each 3.8L bottle, making it easy to apply both indoors and outdoors. For maximum durability and traction, we recommend applying two thin coats (three coats for rough surfaces) to thoroughly clean and dry areas.
- Available Sizes: Deck Grip comes in a 3.8 litre size, enough to cover approximately 50 square metres with two coats, providing plenty of coverage for a variety of surface areas.
- 3.8 Liters: Up to 50 square meters
NOTE
- Read the product label, safety precautions and technical data sheet carefully. Follow complete surface preparation and application instructions.
- Videos are available to illustrate basic application instructions.
- Always wear recommended safety equipment and follow safety precautions.
- Surface preparation varies depending on the type of floor. See the technical data sheet for detailed information.
- All surfaces must be clean, dry and free from dust, dirt, oil, grease, soil, soap scum, waxes, peeling paint and other soluble contaminants.
- Deck Grip must not be diluted in any way.
- Pour one litre of Deck Grip into a separate container. Open the bottle of the anti-slip additive (included) and pour the entire contents into the container with the Deck Grip. Stir thoroughly for even distribution. Stir frequently during application to ensure even distribution of the anti-slip additive.
- It is recommended to perform a test to ensure that the product is suitable to achieve the desired grip on the surface. Test the product in an inconspicuous area and allow it to dry completely to analyze the results.
- Deck Grip mixture should be applied by roller. Use the included roller to evenly coat the surface. Avoid allowing liquid to accumulate in low areas. If product pools, use the roller to spread it out.
- After the first application, it is recommended to wait 2-4 hours before proceeding with the second application. If the first application was done horizontally, apply the second coat vertically
- Drying times: Allow 6 to 12 hours for pedestrian traffic and 24 hours for vehicular traffic.
- Cleaning: While Deck Grip is drying, application equipment may be cleaned with soap and water. The mixed material should be used in its entirety or discarded.
- For general cleaning, use a neutral pH detergent and scrub lightly with a soft bristle brush or use a low pressure rinse.
- Avoid using alcohol-based cleaners.
